A P P E N D I X
B
LEDs
This appendix includes the following topics:
•
Supervisor Module LEDs, page 123
•
•
Supervisor Module LEDs
Status
Color
LED
All diagnostics pass. The module is operational (normal initialization
sequence).
Green
STATUS
Indicates one of the following:
•
The module has detected a slot ID parity error and will not power
on or boot up.
•
The module is not fully inserted and does not have a reliable
connection to the midplane.
•
The diagnostic test has failed.
Red
Indicates one of the following:
•
The inlet air temperature of the system has exceeded the safe
operating temperature limits of the module (a major
environmental warning). The module has been shut down to
prevent permanent damage. The system will be shut down after
two minutes if this condition is not cleared.
•
The module is resetting, and both ejector levers are out.
Flashing red
The module is not receiving power.
Off
Cisco Nexus 7702 Hardware Installation Guide
123