manualshive.com logo in svg

Cisco Nexus 5500 Series NX-OS, Configuration Manual

The Cisco Nexus 5500 Series NX-OS offers a high-performance, reliable network solution. For seamless deployment and optimization, users can access the Configuration Manual for free download at manualshive.com. This comprehensive manual provides step-by-step instructions, enabling smooth installation and configuration of this exceptional product.

Share
Download
background image

•

VSANs can meet the needs of a particular department or application.

VSAN Advantages

VSANs offer the following advantages:

•

Traffic isolation

—

Traffic is contained within VSAN boundaries and devices reside only in one VSAN

ensuring absolute separation between user groups, if desired.

•

Scalability

—

VSANs are overlaid on top of a single physical fabric. The ability to create several logical

VSAN layers increases the scalability of the SAN.

•

Per VSAN fabric services

—

Replication of fabric services on a per VSAN basis provides increased

scalability and availability.

•

Redundancy

—

Several VSANs created on the same physical SAN ensure redundancy. If one VSAN

fails, redundant protection (to another VSAN in the same physical SAN) is configured using a backup
path between the host and the device.

•

Ease of configuration

—

Users can be added, moved, or changed between VSANs without changing the

physical structure of a SAN. Moving a device from one VSAN to another only requires configuration
at the port level, not at a physical level.

Up to 256 VSANs can be configured in a switch. Of these, one is a default VSAN (VSAN 1), and another is
an isolated VSAN (VSAN 4094). User-specified VSAN IDs range from 2 to 4093.

VSANs Versus Zones

Zones are always contained within a VSAN. You can define multiple zones in a VSAN.

Because two VSANs are equivalent to two unconnected SANs, zone A on VSAN 1 is different and separate
from zone A in VSAN 2. The following table lists the differences between VSANs and zones.

Table 17: VSAN and Zone Comparison

Zone Characteristic

VSAN Characteristic

Routing, naming, and zoning protocols are not
available on a per-zone basis.

VSANs equal SANs with routing, naming, and zoning
protocols.

Zones limit unicast traffic.

VSANs limit unicast, multicast, and broadcast traffic.

Membership is typically defined by the pWWN.

Membership is typically defined using the VSAN ID
to F ports.

An HBA or storage device can belong to multiple
zones.

An HBA or a storage device can belong only to a
single VSAN (the VSAN associated with the F port).

Zones enforce membership only at the source and
destination ports.

VSANs enforce membership at each E port, source
port, and destination port.

   Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x

116

OL-30895-01   

Configuring and Managing VSANs

Information About VSANs

Summary of Contents for Nexus 5500 Series NX-OS

































































































































































































































































































































Reviews:

No comments

Related manuals for Nexus 5500 Series NX-OS

Patton electronics 1090 Service Manual preview
1090
Brand: Patton electronics Pages: 8
Vivotek FE9181-H Quick Installation Manual preview
FE9181-H
Brand: Vivotek Pages: 170
Paradyne Comsphere 3510 User Manual preview
Comsphere 3510
Brand: Paradyne Pages: 85
C-Data CR200-1432R-B User Manual preview
CR200-1432R-B
Brand: C-Data Pages: 26
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Brand: Ozenda Pages: 116
Aaeon FWS-7150 Manual preview
FWS-7150
Brand: Aaeon Pages: 57
Juniper NSM4000 Hardware Manual preview
NSM4000
Brand: Juniper Pages: 196
Paradyne FrameSaver DSL 9788 Router Installation Instructions Manual preview
FrameSaver DSL 9788 Router
Brand: Paradyne Pages: 28
DPS Telecom D-PK-NG432 User Manual preview
D-PK-NG432
Brand: DPS Telecom Pages: 80
NETGEAR DGN2200M - Wireless-N 300 Router User Manual preview
DGN2200M - Wireless-N 300 Router
Brand: NETGEAR Pages: 95
Hanwha Techwin Wisenet XRN-6410DB4 User Manual preview
Wisenet XRN-6410DB4
Brand: Hanwha Techwin Pages: 118
Intercel eSAM AK-SM 800 User Manual preview
eSAM AK-SM 800
Brand: Intercel Pages: 17
SMC Sierra Monitor FPC-N38 Startup Manual preview
FPC-N38
Brand: SMC Sierra Monitor Pages: 43
Hama 53178 Instruction Manual preview
53178
Brand: Hama Pages: 45
ELC dmXLAN node6x User Manual preview
dmXLAN node6x
Brand: ELC Pages: 12
Asus WL-500gP Quick Start Manual preview
WL-500gP
Brand: Asus Pages: 221
Asus WL-500W SuperSpeed N Quick Start Manual preview
WL-500W SuperSpeed N
Brand: Asus Pages: 123
Asus WL-500gP V2 Quick Start Manual preview
WL-500gP V2
Brand: Asus Pages: 151

Brands by name

Popular brands

Load more brands