2-30
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
class
class
To specify the name of the class whose policy you want to create or to change or to specify the system
default class before you configure a policy and to enter policy-map class configuration mode, use the
class
command in policy-map configuration mode. To remove the class from a policy map, use the
no
form of this command.
class
{
class-map-name|
class-default
}
no class
{
class-map-name|
class-default
}
Syntax Description
Defaults
No policy map classes are defined.
Command Modes
Policy-map configuration
Command History
Usage Guidelines
Before using the
class
class-map-name
command in policy-map configuration mode, you must create
the class by using the
class-map
class-map-name
global configuration command. The class
class-default
is the class to which traffic is directed if that traffic does not match any of the match criteria
in the configured class maps.
Use the
policy-map
global configuration command to identify the policy map and to enter policy-map
configuration mode. After specifying a policy map, you can configure a policy for new classes or modify
a policy for any existing classes in that policy map.
You attach the policy map to a port by using the
service-policy
interface configuration command.
After entering the
class
command, you enter policy-map class configuration mode, and these
configuration commands are available:
•
bandwidth
:
specifies the bandwidth allocated for a class belonging to a policy map. For more
information, see the
•
exit
: exits policy-map class configuration mode and returns to policy-map configuration mode.
•
no
: returns a command to its default setting.
•
police
: defines an individual policer for the classified traffic. The policer specifies the bandwidth
limitations and the action to take when the limits are exceeded. For more information, see the
and policy-map class commands.
class-map-name
Name of a class map created by using the
class-map
global configuration
command.
class-default
The system default class. This class matches all unclassified traffic. You
cannot create or delete the default class.
Release
Modification
12.252)EY
This command was introduced.
Summary of Contents for ME 3600X
