Cisco Lynksys WIP300 Page 66 User Manual Download

Page: 66 / 90

Wireless-G IP Phone

Appendix B: Glossary

Appendix B: Glossary

This glossary contains some basic networking terms you may come across when using this product. For more advanced
terms, see the complete Linksys glossary at http://www.linksys.com/glossary.

Access Point

- A device that allows wireless-equipped computers and other devices to communicate with a wired network.

Also used to expand the range of a wireless network.

Ad-hoc

- A group of wireless devices communicating directly with each other (peer-to-peer) without the use of an access

point.

Bandwidth

- The transmission capacity of a given device or network.

Bit

- A binary digit.

Boot

- To start a device and cause it to start executing instructions.

Broadband

- An always-on, fast Internet connection.

Browser

- An application program that provides a way to look at and interact with all the information on the World Wide Web.

Byte

- A unit of data that is usually eight bits long

Cable Modem

- A device that connects a computer to the cable television network, which in turn connects to the Internet.

Default Gateway

- A device that forwards Internet traffic from your local area network.

DHCP

(

ynamic

ost

onfiguration

rotocol) - A networking protocol that allows administrators to assign temporary IP

addresses to network computers by “leasing” an IP address to a user for a limited amount of time, instead of assigning
permanent IP addresses.

Summary of Contents for Lynksys WIP300



























































































Search results

Summary of Contents for Lynksys WIP300

Reviews:

Related manuals for Lynksys WIP300

Brands by name

Popular brands

Cisco Lynksys WIP300, User Manual

Search results

Summary of Contents for Lynksys WIP300

Reviews:

Related manuals for Lynksys WIP300

Brands by name

Popular brands