Cisco Lynksys WIP300 User Manual Download

Page: 67 / 90

Wireless-G IP Phone

Appendix B: Glossary

DMZ

(

ilitarized

one) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet.

DNS

(

omain

ame

erver) - The IP address of your ISP's server, which translates the names of websites into IP addresses.

Domain

- A specific name for a network of computers.

Download

- To receive a file transmitted over a network.

DSL

(

igital

ubscriber

ine) - An always-on broadband connection over traditional phone lines.

Dynamic IP Address

- A temporary IP address assigned by a DHCP server.

Encryption

- Encoding data transmitted in a network.

Ethernet

- IEEE standard network protocol that specifies how data is placed on and retrieved from a common transmission

medium.

Firmware

- The programming code that runs a networking device.

FTP

(

ile

ransfer

rotocol) - A protocol used to transfer files over a TCP/IP network.

Full Duplex

- The ability of a networking device to receive and transmit data simultaneously.

Gateway

- A device that interconnects networks with different, incompatible communications protocols.

Half Duplex

- Data transmission that can occur in two directions over a single line, but only one direction at a time.

HTTP

(

yper

ext

ransport

rotocol) - The communications protocol used to connect to servers on the World Wide Web.

Infrastructure

- A wireless network that is bridged to a wired network via an access point.

(

nternet

rotocol) - A protocol used to send data over a network.

IP Address

- The address used to identify a computer or device on a network.

Summary of Contents for Lynksys WIP300



























































































Search results

Summary of Contents for Lynksys WIP300

Reviews:

Related manuals for Lynksys WIP300

Brands by name

Popular brands

Cisco Lynksys WIP300, User Manual

Search results

Summary of Contents for Lynksys WIP300

Reviews:

Related manuals for Lynksys WIP300

Brands by name

Popular brands