Cisco Linksys WRT610N User Manual Download Page 47 | Manualshive

Page: 47 / 67

background image

Appendix D

Warranty Information

45

Simultaneous Dual-Band Wireless-N Gigabit Router

OF SUCH DAMAGES. TO THE EXTENT NOT PROHIBITED BY
APPLICABLE LAW, IN NO EVENT WILL LINKSYS’ LIABILITY
EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.
The foregoing limitations will apply even if any warranty
or remedy provided under this limited warranty fails of its
essential purpose.

No  Linksys  employee,  agent  or  reseller  is  authorized  to
make  any  verbal  or  written  modification,  extension  or
addition to this warranty, and Linksys expressly disclaims
any  such  change  to  this  warranty.  If  any  portion  of  this
limited warranty is found to be void or unenforceable, its
remaining provisions shall remain in full force and effect.

Obtaining Warranty Service

If you have a question about your product
or experience a problem with it, please go to

www.linksysbycisco.com/support

where you will find a

variety of online support tools and information to assist
you  with  your  product.  If  the  product  proves  defective
during  the  Warranty  Period,  contact  Linksys  Technical
Support (or, if you purchased your product from a service
provider, contact the service provider) for instructions on
how  to  obtain  warranty  service. The  telephone  number
for  Linksys Technical  Support  in  your  area  can  be  found
by  clicking  the “Contact  Us”  link  on  the  home  page  of

www.linksysbycisco.com

. Have your product serial

number and proof of purchase on hand when calling. A
DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO
PROCESS  WARRANTY  CLAIMS.  If  you  are  requested  to
return your product, you will be given a Return Materials
Authorization  (RMA)  number.  You  are  responsible  for
properly  packaging  and  shipping  your  product  at  your
cost  and  risk.  You  must  include  the  RMA  number  and
a  copy  of  your  dated  proof  of  original  purchase  when
returning  your  product.  Products  received  without  a
RMA  number  and  dated  proof  of  original  purchase  will
be  rejected.  Do  not  include  any  other  items  with  the
product  you  are  returning.  Defective  product  covered
by this limited warranty will be repaired or replaced and
returned  to  you  without  charge.  Customers  outside  of
the United States of America and Canada are responsible
for  all  shipping  and  handling  charges,  custom  duties,
VAT  and  other  associated  taxes  and  charges.  Repairs  or
replacements not covered under this limited warranty will
be subject to charge at Linksys’ then-current rates.

Technical Support

This  limited  warranty  is  neither  a  service  nor  a
support  contract.  Information  about  Linksys’  current
technical  support  offerings  and  policies  (including
any  fees  for  support  services)  can  be  found  at

www.linksysbycisco.com/support

.

Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,
CA 92623.

«
...
45
46
47
48
49
...
»

Summary of Contents for Linksys WRT610N




































































Reviews:

No comments

Related manuals for Linksys WRT610N

Univerge SV8100

Brand: NEC Pages: 44

Brand: Intellinet Pages: 2

Brand: IEI Technology Pages: 86

Lite N42B1P Series

Brand: Dahua Technology Pages: 14

Brand: Justec Pages: 61

RabbitCore RCM4400W

Brand: Rabbit Pages: 126

ControlPoint 2000

Brand: 4Home Pages: 20

Brand: Zonet Pages: 53

Brand: H3C Pages: 68

Brand: Perle Pages: 4

7798 I/SITE LAN

Brand: CSI Pages: 56

Brand: Omron Pages: 4

ExtremeCloud Appliance E3120

Brand: Extreme Networks Pages: 27

Brand: AMCI Pages: 55

Brand: SeaLevel Pages: 25

Brand: Tripp Lite Pages: 2

Brand: NetApp Pages: 10

BiPAC 8700VAX(L)-1600

Brand: Billion Pages: 327

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands