Chapter 3
Advanced Configuration
22
Simultaneous Dual-Band Wireless-N Gigabit Router
Add a Media Folder
Use this screen to add a media folder.
Media Folder
Media Folder
Display Name
Create a name for the folder. This will
appear in the Database table on the
Media Server
screen.
Partition
The name of the partition is displayed.
Location
The location of the folder is displayed.
New Folder
Create a name for the physical location of
the folder. Then click
Create
.
Share entire Partition
Select this option if the folder
should include the entire partition.
If you do not want to share the entire partition, then select
the folder you do want to share.
Current Folder
The current folder is displayed.
Folder Name
The available folders are listed by Folder
Name.
Enter into Folder
To display sub-folders, click this button.
Select
Select a folder.
Return to Upper Folder
To return to the previous folder,
click this button.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes. Click
Close
to exit the
screen.
On the
Media Server
screen, click
Save Settings
to apply
your changes, or click
Cancel Changes
to clear your
changes.
Storage > FTP Server
The storage options are available when a USB storage
device is connected to the USB port of the Router.
The FTP Server tab creates an FTP server that can be
accessed from the Internet or your local network.
Storage> FTP Server
Setup
Server Name
The default server name of the Router is
WRT610N
.
FTP Server
Select
Enabled
to use the Router as an FTP
server. Otherwise, select
Disabled
. An external USB hard
drive or USB disk must be connected to the USB port to
use this service.
Internet Access
Select
Enabled
to allow access of the
FTP server from the Internet. Otherwise, select
Disabled
to only allow local network access.
FTP Port
Enter the FTP Port number to use. The default
is
21
.
Access
This section lets you add FTP folders that can be accessed
through the FTP client.
Specify Folder to Access
To add an FTP folder to the
Access table, click this button. The
FTP Folder
screen
appears. Proceed to
Create or Edit an FTP Folder
,
page 23
.
Summary
To view a list of FTP folders, click this option.
For each FTP folder, the Display Name, Partition, and
Folder location are displayed.
The database table lists the FTP folders with the following
information: Display Name, Partition, and Folder.
Edit
To change the access settings of an FTP folder, click
this option, and the
FTP Folder
screen appears. Proceed to
Create or Edit an FTP Folder
,
page 23
.
