Cisco LINKSYS WRT54GX4 User Manual Download | Manualshive

Page: 58 / 92

background image

52

Appendix A: Troubleshooting
Common Problems and Solutions

Wireless-G Broadband Router with SRX400

4. Click the

Save Settings

button to continue.

•

If your difficulties continue, change the Size to different values. Try this list of values, one value at a time,
in this order, until your problem is solved:
1462
1400
1362
1300

17. When I enter a URL or IP address, I get a time-out error or am prompted to retry.

•

Check if other PCs work. If they do, ensure that your workstation’s IP settings are correct (IP Address,
Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.

•

If the PCs are configured correctly, but still not working, check the Router. Ensure that it is connected and
powered on. Connect to it and check its settings. (If you cannot connect to it, check the LAN and power
connections.)

•

If the Router is configured correctly, check your Internet connection (DSL/cable modem, etc.) to see if it is
working correctly. You can remove the Router to verify a direct connection.

•

Manually configure the TCP/IP settings with a DNS address provided by your ISP.

•

Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet
Explorer, click

Tools

,

Internet Options

, and then the

Connection

tab. Make sure that Internet Explorer is

set to

Never dial a connection

. For Netscape Navigator, click

Edit

,

Preferences

,

Advanced

, and

Proxy

.

Make sure that Netscape Navigator is set to

Direct connection to the Internet

.

18. I cannot connect to the Internet.

•

For Cable users - Click on the Status tab and make sure you have the Internet IP address is not 0.0.0.0. If
it is, click the DHCP Renew button, and wait a few minutes for the router to try and contact your service
provider. After the router successfully obtains an IP address, restart your computer.

•

For DSL users - 1) Make sure you have typed in your user name and password correctly. Some service
providers use your full e-mail address as the user name. If you are sure you have enter the right user
name, try using username@[isp.com], where isp.com is the name of your service provider. 2) Power down
your DSL Modem, your PC, and your router. Then power on your DSL Modem, wait for the LEDs on the DSL
modem to stop flashing. Power on your router and wait for the power LED to stop flashing. Finally, power
on your PC.

19. My wireless-G speed seems to be slow.

•

Reposition the antenna.

•

Reposition the router so that it's higher up, above your other networking gear.

•

Change CTS Protection to Disable under advanced wireless settings.

«
...
56
57
58
59
60
...
»

Summary of Contents for LINKSYS WRT54GX4





























































































Reviews:

No comments

Related manuals for LINKSYS WRT54GX4

WNR3500 - RangeMax Next Wireless-N Gigabit Router Wireless

Brand: NETGEAR Pages: 124

Nfiniti AirStation WZR-AGL300NH

Brand: Buffalo Tech Pages: 24

Brand: ZyXEL Communications Pages: 340

Brand: 4IPNET Pages: 194

B-Link B-LINK-MIFI

Brand: Brickhouse Security Pages: 8

RangeMax NEXT WNR834A

Brand: NETGEAR Pages: 106

Brand: Medialink Pages: 105

PTP 550E Series

Brand: Cambium Networks Pages: 250

Brand: Samsung Pages: 6

Brand: Samsung Pages: 38

Brand: Otto Pages: 8

Brand: OTC Wireless Pages: 1

CLARITY102 AIRLINKS MH21901

Brand: Monster Pages: 4

Brand: Monoprice Pages: 74

Brand: BAZOO Pages: 2

Brand: ESD Pages: 125

NetGenie NG11EH

Brand: Cyberoam Pages: 16

Brand: qpcom Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands