Cisco LINKSYS WRT54GX4 User Manual Download | Manualshive

Page: 19 / 92

background image

13

Chapter 5: Configuring the Wireless-G Broadband Router
The Setup Tab - Basic Setup

Wireless-G Broadband Router with SRX400

•

PPTP

. Point-to-Point Tunneling Protocol (

PPTP

) is a service that applies to connections in Europe only.

Specify Internet IP Address

. This is the Router’s IP address, as seen from the Internet. Your ISP will provide

you with the IP Address you need to specify here.

Subnet Mask

. This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your

ISP will provide you with the Subnet Mask.

Gateway

. Your ISP will provide you with the Gateway Address.

User Name and Password

. Enter the User Name and Password provided by your ISP.

Connect on Demand: Max Idle Time

. You can configure the Router to cut the Internet connection after it has

been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as
soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio
button. In the

Max Idle Time

field, enter the number of minutes you want to have elapsed before your Internet

connection terminates.

Keep Alive Option:

Redial Period

. If you select this option, the Router will periodically check your Internet

connection. If you are disconnected, then the Router will automatically re-establish your connection. To use
this option, click the radio button next to

Keep Alive

. In the

Redial Period

field, you specify how often you want

the Router to check the Internet connection. The default Redial Period is

30

seconds.

•

Telstra BigPond

. Telstra BigPond is a service that applies to connections in Australia only.

User Name and Password

. Enter the User Name and Password provided by your ISP.

Heart Beat Server.

This is the IP address that the Router has, when seen from the Internet. Your ISP will

provide you with the IP Address you need to specify here.

Figure 5-7: Telstra BigPond Connection Type

Figure 5-6: PPTP Connection Type

«
...
17
18
19
20
21
...
»

Summary of Contents for LINKSYS WRT54GX4





























































































Reviews:

No comments

Related manuals for LINKSYS WRT54GX4

Brand: Super Circuits Pages: 4

Brand: Moxa Technologies Pages: 20

Brand: Telrad Pages: 10

Brand: E-ZY Pages: 8

WAC6500 Indoor Series

Brand: ZyXEL Communications Pages: 2

Brand: Cerio Pages: 151

Brand: XINDAO Pages: 20

Brand: NEBRA Pages: 10

Brand: Canon Pages: 7

Brand: HP Pages: 6

Brand: HP Pages: 23

Brand: HP Pages: 14

Brand: HP Pages: 3

nova AX3000 EX12

Brand: Tenda Pages: 16

Brand: Tenda Pages: 72

Brand: Tenda Pages: 92

Brand: Advantek Networks Pages: 62

Brand: Toshiba Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands