Cisco Linksys WRK54G User Manual Download Page 21 | Manualshive

Page: 21 / 75

background image

15

Chapter 6: Configuring the Wireless-G Broadband Router
The Setup Tab - Basic Setup

Wireless-G Broadband Router

DHCP Server

. DHCP is enabled by factory default. If you already have a DHCP server on your network, or you

don’t want a DHCP server, then click the

Disable

radio button (no other DHCP features will be available).

Starting IP Address

. Enter a value for the DHCP server to start with when issuing IP addresses. Because the

Router’s default IP address is 192.168.1.1, the Starting IP Address must be 192.168.1.2 or greater, but smaller
than 192.168.1.253. The default Starting IP Address is

192.168.1.100

.

Maximum Number of DHCP Users

. Enter the maximum number of PCs that you want the DHCP server to assign

IP addresses to. This number cannot be greater than 253. The default is 50.

Client Lease Time

. The Client Lease Time is the amount of time a network user will be allowed connection to the

Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased”
this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address.
The default is 0 minutes, which means one day.

Static DNS

(1-3). The Domain Name System (DNS) is how the Internet translates domain or website names into

Internet addresses or URLs. Your ISP will provide you with at least one DNS Server IP Address. If you wish to use
another, type that IP Address in one of these fields. You can type up to three DNS Server IP Addresses here. The
Router will use these for quicker access to functioning DNS servers.

WINS

. The Windows Internet Naming Service (WINS) converts NetBIOS names to IP addresses. If you use a WINS

server, enter that server’s IP Address here. Otherwise, leave this blank.

Time Setting

Change the time zone in which your network functions from this pull-down menu.

Figure 5-12: Time Setting

Figure 5-11: Network Address Server Settings

«
...
19
20
21
22
23
...
»

Summary of Contents for Linksys WRK54G












































































Reviews:

No comments

Related manuals for Linksys WRK54G

8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink

Brand: Tyco Electronics Pages: 18

Ethernet Communication Module DVPEN01-SL

Brand: Delta Electronics Pages: 54

BroadLink SP3353

Brand: MicroNet Pages: 66

Brand: Buffalo Pages: 2

Brand: H3C Pages: 68

Brand: Abocom Pages: 1

Brand: ADTRAN Pages: 161

DiskStation Series

Brand: Synology Pages: 6

Brand: Radio Shack Pages: 40

QuantaGrid D51PH-1ULH

Brand: QCT Pages: 167

Brand: Foscam Pages: 92

Brand: TP-Link Pages: 2

Brand: Nokia Pages: 111

Brand: VegaStream Pages: 41

Brand: Edimax Pages: 50

Brand: Datavideo Pages: 25

Brand: Olicom Pages: 84

Brand: Conel Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands