Cisco Linksys WIP310, User Manual

Page: 19 / 35

Chapter2
Phone Menus
Wireless-G IP Phone
current Contacts will display .
Press the
up or down arrow to highlight the entry you
want to delete .
Press
Optons (left soft key) . A sub-screen will display,
press the up or down arrow to highlight Remove
Entry .
Press the
select button . The Delete Entry screen will
display the message, “Are you sure you want to delete
the selected entry ?” Press Yes (left soft key) to delete or
No (right soft key) to exit without changes .
Press
Optons
(left soft key) to delete another entry or
Back
(right soft key) to return to the Main menu .
To edit a Contact:
When the handset is in the standby mode, press the
select button and Main Menu options will display . If
Contacts is not the on-screen selection, press the left
or rght arrow to select it . Or you can press Contacts
(right soft key) when you are in standby mode .
Press the
select button to access the Contacts list . All
current Contacts will display .
Press the
up or down arrow to highlight the entry you
want to edit .
Press
Optons (left soft key) . A sub-screen will display,
press the up or down arrow to highlight Edt .
Press the
select
button . The Contacts Entry screen will
display .
You can edit the Contact’s Name, Home Phone, Work
Phone, Mobile Phone, Email address and street address .
Use the handset’s keypad to change the information .
After the entry is edited, press OK (select button) to
confirm the change, or press Delete (right soft key)
to delete the entire entry .
A message will display, “ Do You want to save your
changes to this entry? ” Press
Yes
(left soft key) to
save or
No
(right soft key) to cancel .
Press
Optons
(left soft key) to add another entry or
Back
(right soft key) to return to the Contacts menu .
3 .
4 .
5 .
1 .
2 .
3 .
4 .
5 .
6 .
a .
b .