Cisco Linksys WIP310, User Manual, Page: 18 / 35

Chapter2
Phone Menus
Wireless-G IP Phone
Chapter2
Main Menu > Call History > Outgoing Calls > Outgoing Call Detail
In addition to calling, you can save or delete the number .
When the entry is highlighted, press
Optons (left soft
key), to see the submenu options . You can choose to Save
to Contacts , Send Message , Clear This List or Clear This Entry
by using the up or down arrow to highlight your choice
and then press the
select button to save or delete .
Main Menu > Call History > All Calls > Options
If you choose to Save to Contacts , you will be returned
to the Contacts Entry menu, where you can edit the
information .
If you choose to Send Messages , you .
If you choose Clear This List or Clear This Entry , you will see
the message “ Are you sure you want to delete this list/en-
try? ” Press Yes (left soft key) to delete or No (right soft
key) to exit without changes .
Main Menu > Contacts
or
Contacts Menu
You can access the Contact menu through the Main Menu
or by pressing the
Contacts
(right soft key) when in the
standby mode .
To add a Contact:
Main Menu > Contacts or Contacts
When the handset is in the standby mode, press the
select button to see the Main Menu options . Press
the left or rght arrow to select Contacts , if it is not
on-screen . Or you can press Contacts (right soft key)
when you are in standby mode .
Press the
select button to access the Contacts list . All
current Contacts will display . If there are no names, a
blank screen will display .
Press
Optons
(left soft key) . A sub-screen will display,
press the
up
or
down
arrow to highlight Add New
Entry.
Main Menu > Contacts > Add New Entry or Contacts > Add New Entry
Press the
select
button . Contact Entry will display .
You can add the Contact’s Name, Home Phone, Work
Phone, Mobile Phone, Email address and street address .
Use the handset’s keypad to enter the information .
Press
OK (select button) when you are finished .
Press Optons (left soft key) to add another entry or Back
(right soft key) .
To delete a Contact:
When the handset is in standby mode, press the
select
button and Main Menu options will display . If Contacts
is not the on-screen selection, press the
left
or
rght
arrow to select it . Press
OK
(select button) . Or you
can press
Contacts
(right soft key) when you are in
standby mode .
Press the
select button to access the Contacts list . All
1 .
2 .
3 .
4 .
1 .
2 .