manualshive.com logo in svg

Cisco LinkSys RTP300, User Manual, Page: 66 / 100

Share
Download
Cisco LinkSys RTP300 User Manual Download Page 66

Broadband Router with 2 Phone Ports

61

Appendix A: Troubleshooting
Common Problems and Solutions

14. My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a 
period of inactivity, just like a normal phone dial-up connection to the Internet. There is a setup option to 
“keep alive” the connection. This may not always work, so you may need to re-establish connection 
periodically.

A. To connect to the Router, go to the web browser, and enter 

http://192.168.15.1

 or the IP address of the 

Router.

B. Enter the password, if asked. (The default password is admin.)
C. On the 

Basic Setup

 tab, select the option 

Keep Alive

, and set the 

Redial Period

 option at 

20

 (seconds).

D. Click the 

Save Settings

 button.

E.

Click the 

Status

 tab, and click the 

Connect

 button.

F.

You may see the login status display as Connecting. Press the 

F5

 key to refresh the screen, until you see 

the login status display as Connected.

If the connection is lost again, follow steps E and F to re-establish connection.

15. I can't access my email, web, or VPN, or I am getting corrupted data from the Internet.

The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500.  
For most DSL users, it is strongly recommended to use MTU 1492.  If you are having some difficulties, 
perform the following steps:

A. To connect to the Router, go to the web browser, and enter 

http://192.168.15.1

 or the IP address of the 

Router.

B. Enter the password, if asked. (The default password is 

admin

.)

C. On the 

Basic Setup

 tab, look for the MTU option, and select 

Enable

. In the 

Size

 field, enter 1492.   

D. Click the 

Save Settings

 button to continue.

Summary of Contents for LinkSys RTP300





































































































Reviews:

No comments