Cisco LinkSys RTP300 User Manual Download Page 47

Page: 47 / 100

Broadband Router with 2 Phone Ports

Chapter 5: Configuring the Router
The Administration Tab - Factory Defaults

The Administration Tab - Factory Defaults

The

Factory Defaults

screen allows you to reset the Router to its router factory defaults. If you want to reset the

Router to its voice factory defaults, then you need a password available only from your Internet phone service
provider. Contact your provider for more information.

Factory Defaults

Restore Router Factory Defaults

. If you wish to reset the Router to its router factory defaults, click the

Yes

radio button and then the

Save Settings

button. Then follow the on-screen instructions.

Restore Voice Factory Defaults

. If you click the

Yes

radio button and then the

Save Settings

button, you will

see a screen asking for a password. Enter the password provided by your Internet phone service provider, and
follow the on-screen instructions.

When you have finished making changes to this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes.

Figure 5-23: Administration Tab -

Factory Defaults

NOTE:

Any custom settings you have saved will be lost when the default settings are restored, so

before you restore the router factory defaults, write down any settings you may need later.

Summary of Contents for LinkSys RTP300





































































































Search results

Summary of Contents for LinkSys RTP300

Reviews:

Cisco LinkSys RTP300, User Manual, Page: 47 / 100

Search results

Summary of Contents for LinkSys RTP300

Reviews: