manualshive.com logo in svg

Cisco LinkSys RTP300, User Manual, Page: 36 / 100

Share
Download
Cisco LinkSys RTP300 User Manual Download Page 36

Broadband Router with 2 Phone Ports

30

Chapter 5: Configuring the Router

The Access Restrictions Tab - Filter

The Access Restrictions Tab - Filter

Filters can block specific internal users from accessing the Internet, anonymous Internet requests, and/or 
multicasting.

Filter IP Address Range

You can create up to five different IP Address filters. To set up a filter, enter the IP address you wish to filter in 
the field provided. Users who have filtered IP addresses will not be able to access the Internet at all.

Filter Port Range

You can create up to five different Port Range filters. To filter users by network port number, select the protocol 
you want to filter, 

TCP

, 

UDP

, or 

Both

, from the 

Protocol

 drop-down menu. Enter the port numbers you want to 

filter in the 

Start

 and 

End 

fields. Users connected to the Router will no longer be able to access any port number 

listed there.

Filter MAC Address

This feature blocks computers with specific MAC addresses from going out to the Internet. For information on 
obtaining a MAC address, go to “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter.” 
To set the MAC filter, click the 

Edit MAC Filter Setting

 button.

Edit MAC Filter Setting

. Click the 

Edit MAC Filter Setting

 button. Select the range of MAC address entries in 

the drop-down box. In each 

mac

 field, enter the MAC address you want to filter.  Click the

 Apply

 button before 

closing the window. To cancel changes, click the 

Undo

 button.

Figure 5-13: Access Restrictions Tab - 

Filter

Figure 5-14: Filtered MAC Address

Summary of Contents for LinkSys RTP300





































































































Reviews:

No comments