Cisco Linksys E1000 User Manual Download

Page: 29 / 34

Wireless-N Router

Linksys E1000

Chapter 2: Advanced Configuration

Administration > Firmware Upgrade

The

Firmware  Upgrade

screen allows you to upgrade the

Router’s firmware . Do not upgrade the firmware unless

you are experiencing problems with the Router or the new

firmware has a feature you want to use .

Administration > Firmware Upgrade

NOTE:

The Router may lose the settings

you have customized . Before you upgrade

its firmware, write down all of your custom

settings . After you upgrade its firmware, you

will have to re-enter all of your configuration

settings .

Firmware Upgrade

Before upgrading the firmware, download the

Router’s firmware upgrade file from the website,

www.linksys.com/support .

Please select a file to upgrade the firmware

Click

Browse and select the firmware upgrade file .

Start to Upgrade

After you have selected the appropriate

file, click this option, and follow the on-screen instructions .

WARNING:

Do not interrupt the upgrade

process . You should not turn off the power or

press the Reset button during the upgrade

process . Doing so may disable the Router .

Status > Router

The

Router

screen displays information about the Router

and its current settings .

Status > Router

Router Information

Firmware Version

The version number of the Router’s

current firmware is displayed .

Firmware Verification

The unique identifier of the

firmware is displayed .

Current Time

The time set on the Router is displayed .

Internet MAC Address

The Router’s MAC address, as

seen by your ISP, is displayed .

Host Name

The Host Name of the Router is displayed (if it

was entered on the

 Setup > Basic Setup

screen) .

Domain Name

The Domain Name of the Router is

displayed (if it was entered on the

  Setup  >  Basic  Setup

screen) .

Internet Connection

This section shows the current network information

stored in the Router . The information varies depending on

the Internet connection type selected on the

Setup > Basic 

Setup

screen .

For a DHCP connection, select Release IP Address or

Renew IP Address as appropriate to release or renew

a DHCP lease . For a PPPoE or similar connection, select

Connect or Disconnect as appropriate to connect to or

disconnect from the Internet .
Click Refresh to update the on-screen information .

Summary of Contents for Linksys E1000



































Search results

Summary of Contents for Linksys E1000

Reviews:

Related manuals for Linksys E1000

Brands by name

Popular brands

Cisco Linksys E1000, User Manual

Search results

Summary of Contents for Linksys E1000

Reviews:

Related manuals for Linksys E1000

Brands by name

Popular brands