6-8
Installing Cisco Intrusion Prevention System Appliances and Modules 5.1
OL-8677-01
Chapter 6 Installing IPS-4260
Specifications
Specifications
Table 6-4
lists the specifications for IPS-4260.
Accessories
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Table 6-4
IPS-4260 Specifications
Dimensions and Weight
Height
3.45 in. (87.6 cm)
Width
17.14 in. (435.3 cm)
Depth
20 in. (508 cm)
Weight
40.0 lb (18.14 kg)
Form factor
2 RU, standard 19-inch rack-mountable
Power
Autoswitching
100V to 240V AC
Frequency
47 to 63 Hz, single phase
Operating current
8.9 A
Steady state
588 W max continuous
Maximum peak
657 W
Maximum heat dissipation
648 BTU/hr
Environment
Temperature
Ope32°F to +104°F (+0°C to +40°C)
Nonoperating -104°F to +158°F (-40°C to +70°C)
Relative humidity
Operating 10% to 85% (noncondensing)
Nonoperating 5% to 95% (noncondensing)
Altitude
Operating 0 to 9843 ft (3000 m)
Nonoperating 0 to 15,000 ft (4750 m)
Shock
Operating Half-sine 2 G, 11 ms pulse, 100 pulses
Nonoperating 25 G, 170 inches/sec delta V
Vibration
2.2 Grms, 10 minutes per axis on all three axes