background image

22

 

Establishing a Meet Me conference

Step 1

Press the 

Phone

 button.

Step 2

Press the 

Menu

 button.

Step 3

Select Call Functions and then select Meet Me.

Step 4

Dial the Meet Me conference number.

Step 5

Follow the voice instructions to establish the Meet Me conference.

Joining a Meet Me conference

  •

Dial the Meet Me conference number provided by the Meet Me conference coordinator. 

You are connected to the conference once the conference initiator has dialed in and established the 
conference.

Call Transfer

To Transfer a call 

Step 1

While on a call, press the 

Transfer

 softkey. 

This places the call on hold.

Step 2

Dial the number to which you want to transfer the call.

Step 3

When you hear ringing, press the 

Transfer

 softkey again, or when the party answers, announce 

the call and then press the 

Transfer

 softkey.

Note

If the call fails to transfer, press the 

Resume

 softkey to return to the original call.

Call Park

The IP Conference Station allows you to store or “park” a call at a specified number and then use any 
other phone in the Cisco CallManager system (for example, a phone in someone else’s office or in a 
conference room) to retrieve the call. Call Park numbers are configured by the system administrator.

Summary of Contents for IP Conference Station 7935





































Reviews: