62
Configuring the Switch with the CLI Setup Program
Accessing the CLI Through the Console Port
Figure 41
Connecting the Console Cable
3.
Configure the baud rate and character format of the PC or terminal to match the console port characteristics:
—
9600 baud
—
8 data bits
—
1 stop bit
—
No parity
—
None (flow control)
4.
Connect power to the switch as described in
Wiring the Power Source, page 39
.
5.
The PC or terminal displays the bootloader sequence. Press
Enter
to display the setup prompt. Follow the steps in
the
Completing the Setup Program, page 65
.
USB Console Port
1.
If you are connecting the switch USB console port to a Windows-based PC for the first time, install a USB driver. See
Installing the Cisco Microsoft Windows XP, 2000, Vista, 7, 8, and 10 USB Device Driver, page 64
for more
information.
1
RJ-45 console port
2
Console cable (RJ-45-to-DB-9 adapter cable)
C isco IE 3010
20
8
3
8
6
2
1
1
