15
Switch Installation
Installing the Switch
Installing the Switch
Rack-Mounting, page 15
Wall-Mounting, page 22
Rack-Mounting
To rack-mount the switch, select the rack size and follow the steps in these sections:
Attaching Brackets for 19-Inch Racks, page 15
Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional), page 17
Attaching Brackets for 23-Inch Racks, page 20
Attaching Brackets for ETSI Racks, page 21
Rack-Mounting the Switch, page 21
.
Warning:
For mounting railway-application equipment and for EN50155 standard compliance, the switch must be
installed only in a rack mid-mounting position. If you install the switch in a front rack-mounting (cable side or power
supply side) position or in a wall-mounting position, a mechanical failure can occur that results in the switch
becoming detached from the rack. Statement 403
Attaching Brackets for 19-Inch Racks
The following illustrations show how to attach brackets to the switches.
Warning:
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to ensure
your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.
Statement 1006
