7-26
Network Processing Engine and Network Services Engine Installation and Configuration
OL-4448-12
Chapter 7 NPE-G1 and NPE-G2 Installation and Configuration Information
Installing the NPE-G1 or NPE-G2
Upgrading the SDRAM SODIMMs on the NPE-G1 (Optional)
If you have purchased an SDRAM memory upgrade for the NPE-G1, replace the SDRAM SODIMMs
on the NPE-G1 using the following instructions.
Removing a SODIMM
Step 1
Locate the SODIMMs on the NPE-G1.
Figure 7-14
Locating the SODIMMs on the NPE-G1
Note
Both SODIMMs must be of the same size and type, and both SODIMM sockets must be populated.
Step 2
Remove the SODIMM you want to replace by pulling outward on the SODIMM spring latches with your
thumbs.
The SODIMM springs up to allow you to easily pull it from the socket.
1
SODIMM 2
2
SODIMM 1
66948
G I G A B I T E T H E R N E T 0 / 1
R J 4 5
G B I C
E N
R X
T X
L I N K
CONSOLE
AUX
G I G A B I T E T H E R N E T 0 / 1
R J 4 5
G B I C
E N
R X
T X
L I N K
G I G A B I T E T H E R N E T 0 / 1
R J 4 5
G B I C
E N
R X
T X
L I N K
C P U
R E S E T
C O M PA C T F L A S H
POWER
ON
S L O T
A C T I V E
NETWORK PROCESSING ENGINE - G1
2
1
