Figure 46: Firepower Network Module 10G
Ethernet
X
/1
2
Captive screw/handle
1
Ethernet
X
/5
4
Ethernet
X
/3
3
Ethernet
X
/2
6
Ethernet
X
/7
5
Ethernet
X
/6
8
Ethernet
X
/4
7
Network activity LEDs
• Off—No connection or port is not in
use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
10
Ethernet
X
/8
9
Step 1
Do one of the following:
a) Power down the chassis by moving the power switch to the OFF position (if removing a network module that does
not
support hot swapping).
See
for more information about the power switch.
b) Bring the network module offline using the appropriate CLI command (if removing a network module that
supports
hot swapping). All network module configuration is saved.
Cisco Firepower 9300 Hardware Installation Guide
64
Maintenance and Upgrade
Remove and Replace the Single-Wide Network Module
