Cisco E-Series, User Manual

Page: 12 / 672

10
Wireless Security
Linksys E-Series
RADIUS
This option features WEP used in coordination with a RADIUS server (This
should only be used when a RADIUS server is connected to the router )
noTE:
If you select RADIUS as your Security Mode, each device in your
wireless network MUST use RADIUS and the same encryption and
shared key
RADIUS Server Enter the IP address of the RADIUS server
RADIUS Port Enter the port number of the RADIUS server The default is 1812
Shared Secret Enter the key shared between the router and the server
Encryption
Select a level of WEP encryption,
(40/64-bit 10 hex digits)
or
104/128-bit (26 hex digits)
The default is
40/64-bit (10 hex digits)
Passphrase
Enter a passphrase to automatically generate WEP keys Then
click
Generate
Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually
TX Key Select a default TX (Transmit) Key to use The default is 1
Disabled
If you choose to disable wireless security, you will be informed that wireless
security is disabled when you first attempt to access the Internet You will given
the option to enable wireless security, or confirm that you understand the risks
but still wish to proceed without wireless security