Chapter 4 Supporting the Hard Disk Drive Test
46
4011411 Rev B
Note:
To define these characteristics, display the Set Up Server window by
following the quick path for your system configuration:
Single-site systems:
DNCS Administrative Console > Application Interface
Modules tab > BFS Client > File > New Server
Multi-site systems:
DNCS Administrative Console > Application Interface
Modules tab > BFS Client > File > All Sites > File > New Server
3
Add the
testparam.cfg
file to the hddtest server in the BFS Client window.
Adding an HDD Test Server to the BFS
Note:
This procedure can be used for systems that support multiple sites (RCS-
enabled) or single sites.
1
On the DNCS Administrative Console, select the
Application Interface Modules
tab.
2
Click
BFS Admin
. Choose one of the following options:
For single-site systems
, the Site DNCS BFS Administration window opens.
Click
File
and select
All Sites
.
For multiple-site (RCS-enabled) systems
, the Please Select a Site window
opens.
3
Select the
Servers
tab.
4
Click
File
and select
New
. The Authorize BFS Server window opens.
5
Enter the following data into the fields of the Authorize BFS Server window:
In the Server Name field, enter
hddtest
.
From the Available Sources list, select
Out of Band
.
Click
Add
.
Result:
The Authorize BFS Server window is configured as shown in the
following example.
