Chapter 2 Customizing DVR Services
14
4011411 Rev B
Subscriber Impact
DVR Behavior
Default Behavior
Custom Behavior
First Runs
Recording Option
(_FRDA SAM
service)
From the All Episode Recording
Options screen, subscribers can
record all episodes (first-run and
rerun episodes) by selecting any of
the following options from the All
Episode Recording Options screen:
On this channel at any time
On this channel, this day, and in
this time slot
On this channel, any day, and in
this time slot
When customized, the First Run only
on this channel option is added to the
All Episode Recording Options screen,
as shown in the following example.
Selecting this option allows
subscribers to record first runs (new
episodes) of a selected program on a
particular channel.
Power Save Feature
By default, the Power Save feature is
enabled for DVR service. When this
feature is enabled, a DVR spins
down the hard disk drive and
activates a screen saver after any 15
minute period of inactivity that
occurs between 1 a.m. and 6 a.m.
When customized, the Power Save
feature is disabled for a DVR.
To disable the Power Save feature,
contact Cisco Services for assistance.
Screen-Saver Logo
(ssmsologo.rle)
When in spin-down mode, DVRs
display a black screen with the
message
Press any remote key to
continue watching TV
. This
message moves every 10 seconds to
prevent screen burn in.
When enabled, the configured logo
appears above the default message, as
shown in the following example. The
logo and message move every 10
seconds to prevent screen burn in.
Note:
To enable this feature, refer to
LogoTool Software User's Guide
(part
number 4000820)
and
Configuring
Logos on the DNCS
(part number
738163).
