Chapter 2 Customizing DVR Services
32
4011411 Rev B
10
Click
Cancel
to close the Set Up Package window and return to the Package List
window.
11
Click
File
and then select
Close
to close the Package List window and return to
the DNCS Administrative Console.
12
Refer to the hexadecimal conversion table in
EID Conversion Table
(on page 55)
to convert the EID from hexadecimal format to decimal format, and then write
the decimal format of the EID here: ____________________
13
Go to
Adding the Stand-Alone Service to the SAM
(on page 32).
Adding the Stand-Alone Service to the SAM
1
On the DNCS Administrative Console, click the
Application Interface Modules
tab.
2
Click
SAM Service
. The SAM Service List window opens.
3
Click
File
and then select
New
. The Set Up SAM Service window opens.
4
Follow these instructions to enter data in the fields of the Set Up SAM Service
window:
Service Name:
Enter a name for the service, such as
Stand-Alone
.
Short Description:
Enter
_SCIW
.
Important:
You must enter
_SCIW
for the Short Description. Otherwise, your
system will be unable to support stand-alone authorization.
Long Description:
Enter a long description for the stand-alone feature, such
as
Stand-Alone Authorization
. This information is for your use only.
Subscribers will not see the text that you enter here.
Note:
You can enter up to 32 alphanumeric characters.
Application URL:
Enter
dummyURL;EID=#
, replacing the # symbol with
the decimal equivalent of the EID belonging to the Stand-Alone package.
Notes:
–
To obtain this number, refer to step 12 of
Adding a Package to Control
Subscriber Access to the Stand-Alone Mode
(on page 31).
–
Entering this number limits Stand-Alone authorization only to
subscribers authorized for the stand-alone package.
