Cisco DMP 4305G, User Manual

Page: 95 / 122

11-15
User Guide for Cisco Digital Media Player Device Manager 5.2.x
OL-15764-03
Chapter 11 Configure Network Settings
Procedures
DMPDM loads its basic settings page in your browser.
Step 7
Choose Disabled from the Dynamic IP Addressing (DHCP) list, and then:
a.
Enter in the IP Address field the static IP address that your DMP should use.
b.
Enter in the Subnet Mask field the netmask that your DMP should use with its static IP address.
c.
Enter in the Default Gateway field the network gateway that your DMP should use with its static
IP address.
d.
Enter in the Primary DNS Server field the DNS server that your DMP should use with its static
IP address.
Step 8
( Optional ) Will a network address translation (NAT) service give your DMP a private IP address? If so:
a.
Choose Yes from the Using NAT list.
b.
Enter in the NAT IP Address field the 1-to-1 public address (which is configured on the local router)
that corresponds to the private IP address.
Step 9
Click Apply .
Step 10
Click Save Configuration in the Administration list, and then click Save .
Step 11
Click Restart DMP in the Administration list, and then click Restart .