Cisco DMP 4305G, User Manual

Page: 93 / 122

11-13
User Guide for Cisco Digital Media Player Device Manager 5.2.x
OL-15764-03
Chapter 11 Configure Network Settings
Procedures
•
WPA2-PSK
•
WPA2-EAP
The security method that you choose controls, in part, which fields and options this DMPDM page
shows to you.
•
When you see the PSK field and you chose a WEP-based security method, enter in it the key
from which your 64-bit or 128-bit passphrase is cryptographically derived.
•
When you see the PSK field and you chose a WPA-based or WPA-2-based security method,
enter in it the pre-shared key for your network.
•
When you see the Encryption list, choose from it either TKIP or CCMP AES .
•
When you see the EAP list, choose from it either FAST , MD5 , or PEAP (ver.0) .
•
When you see the Username and Password fields, enter in them respectively a valid username
for your wireless network and the password for that username.
c.
Choose Enabled from the Dynamic IP Addressing (DHCP) list.
Tip Will you ever deploy your DMP in a wireless network that does not have any DHCP server?
If so, you can
configure your DMP to use a static IP address.
d.
( Optional ) Click Probe to check whether these settings work correctly with your wireless network.
e.
When you are satisfied with your choices, Click Select .
f.
Click Save Configuration in the Administration list, and then click Save .
Step 4
Disconnect the Ethernet cable from your DMP.
Step 5
Click Restart DMP in the Administration list, and then click Restart .
Step 6
Stop. You have completed this procedure.
Related Topics
•
Physical Interfaces (I/O Ports), page 2-4
•
Connect Over Ethernet, page 2
•
Assign a Static IP Address to a Wireless DMP 4400G, page 11-16