6-8
User Guide for Cisco Digital Media Player Device Manager 5.2.x
OL-15764-03
Chapter 6 Connect to a Presentation System
Procedures
Step 4
Turn
On
the touchscreen.
Tip
Does a message on the touchscreen say that it must download a “characterization” file? This
happens only when your touchscreen uses technologies from Elo TouchSystems and when you
have never turned it On previously (or after its CF card is reformatted). When you see this
message, please disregard it. The touchscreen will obtain its characterization file automatically
during a later stage of DMP setup.
Step 5
Stop. You have completed this procedure.
Related Topics
•
Physical Interfaces (I/O Ports), page 2-4
•
Choose and Calibrate a Touchscreen Driver, page 10-2
Connect to an Analog Display or Projector
Tip
DMPs support connections to analog presentation systems,. However, we recommend strongly that you
use
digital
presentation systems whenever possible.
Procedure
Step 1
Make connections for video.
a.
Plug one yellow jack from the RCA video cable into the
CVBS
interface on the back panel of
your DMP.
b.
Connect the free end of this cable to the corresponding interface on your presentation system.
Step 2
Make connections for audio.
a.
Plug the 3mm jack on the RCA audio cable into the
AUDIO
interface on the back panel of
your DMP.
b.
Connect the free end of this cable to the corresponding interface on your presentation system.
Step 3
If the presentation system is not already turned on, turn it
On
now.
Step 4
Stop. You have completed this procedure.
Related Topics
•
Physical Interfaces (I/O Ports), page 2-4
•
Understand How to Work Around the Low Signal Quality of Composite Video, page 6-5
Summary of Contents for DMP 4305G
Page 9: ...P A R T 1 Before You Use DMPDM ...
Page 10: ......
Page 43: ...P A R T 2 Use DMPDM ...
Page 44: ......
