Cisco Digital Media System 3.5 Administration Manual Download Page 66

Page: 66 / 150

3-22

Cisco Digital Media System 3.5 Appliance Administration Guide

OL-11574-02

Chapter 3 Installing and Configuring the Cisco Digital Media Manager 3.5 Appliance

Step 4

Specify the appropriate Video Portal configuration settings.

Step 5

Click the

Video Portal sub-tab

Step 6

Modify the following Video Portal settings:

Video Portal Server Base

—The base domain of the URL to your server hosting the Video Portal.

The URL to the live video portal

—The URL to the video portal instance.

Default Audio Only Image (400x300 pixels)

—The default image that is displayed globally for any

content offering that does not have its own when a piece of content is an audio file. This

only

applies

to the Flash version of the Digital Media.

Note

Ensure that the file being referenced resides in the path specified in the Upload Path on File
System in the Global Variables, variable #11.

Note

The JPG format must be non-progressive JPG.

Summary of Contents for Digital Media System 3.5























































































































































Search results

Summary of Contents for Digital Media System 3.5

Reviews:

Related manuals for Digital Media System 3.5

Brands by name

Popular brands

Cisco Digital Media System 3.5, Administration Manual

Search results

Summary of Contents for Digital Media System 3.5

Reviews:

Related manuals for Digital Media System 3.5

Brands by name

Popular brands