Cisco D9887B, Installation And Configuration Manual

Page: 220 / 290

Chapter 5 Using the Web Client to Configure the D9887B Receiver
196 78-4043743-01 Rev A
Feature Licensing
The Web Client is the easiest way to upgrade the licensing on the D9887B receiver.
The following licenses are available for the options (if restricted to only certain
installed options):

"SCTE 35/104" – conversion of SCTE35 to SCTE 104 VANC packets – Not for the
MPEG-2 Decoder 4:2:2 with Genlock (1 Video, 4 Audio) option, needs SDI output
option (see SCTE-35 to SCTE-104 Setup)

"h.264" – so it can decode MPEG4/H.264

"Advanced Satellite Features" – allows multistream, VCM, 16APSK and 32APSK
– Qad Input DVB-S Receiver with LNB option
Login to the D9887B receiver Remote Web Client as an administrator, and then click
the
Admin tab. The first section under this tab is "Feature Licensing". The unit’s
options determine the licenses that are applicable to the unit, in the example "h.264"
is listed as well as "SCTE35/104" each followed by either "Enabled" or "Disabled." If
all listed features are "Enabled," you do not need to upgrade the licensing.
When a license is upgraded, the entire D9887B receiver unit and all of the options
that support the licensed features can now support the additional feature
capabilities.
Follow these steps to upgrade
1 Click on the Window button on the left under "Feature Licensing."
2 Enter your newly acquired license key in the space provided, and then press the
OK button.