Cisco D9887B, Installation And Configuration Manual

Page: 111 / 290

Quad Input DVB-S/DVB-S2 Receiver with LNB Power Option
78-4043743-01 Rev A 87
DVB Mode
The DVB-S/S2 card can receive either DVB-S or DVB-S2 transmission.
1 Use the Up and Down buttons to move the cursor to "DVB Mode," then press the
Enter button.
2 Use the Up and Down buttons to select either ("DVB-S", "DVB-S2"), then press
the Enter button to save the selection.
Enabling Advanced DVB-S2 Capabilities
The Quad Input DVB-S/DVB-S2 Receiver with LNB option card can support
Multistream input, VCM, 16APSK, and 32APSK Modulation. These advanced
capabilities are enabled with an "Advanced Satellite Features" license, see
Feature
Licensing (on page 168). The license is enabled by entering a License Key and the
status of the License is noted in the License "Feature List." The license enables the
"Advanced Satellite Features" capabilities for all Quad Input DVB-S/DVB-S2
Receiver with LNB option cards in the D9887B receiver.
When licensed, the "Multistream" settings will be available and the Quad Input
DVB-S/DVB-S2 Receiver with LNB option card will be able to receive multistream
transport streams, VCM, 16APSK and 32APSK modulation.
Multistream Mode
When "Multistream" is disabled (or not licensed), the Quad Input DVB-S/DVB-S2
Receiver with LNB option card will not be able to receive multistream inputs. The
Quad Input DVB-S/DVB-S2 Receiver with LNB option will identify the input error
as a multistream input.
1 Use the Up and Down buttons to move the cursor to "Multistream," then press
the Enter button.
2 Use the Up and Down buttons to select either ("Off", "On"), then press the Enter
button to save the selection.