manualshive.com logo in svg

Cisco D9865, Installation And Operation Manual

Share
Download
Cisco D9865 Installation And Operation Manual Download Page 82

4-48

D9865 Satellite Receiver Installation and Operation Guide

4035197 Rev C

Changing the Lock Level Password

The Advanced Administration sub-menu allows you to change the following:
• Set Lock Level Password - to change the current lock level password (1234).
• Factory Reset - to restore the receiver to factory default settings.

Changing the Lock Level Password

A unique lock level password (4-digit password) protects the current receiver 
settings against unauthorized changes. When changing the password, record and 
keep this number in a secure location. The default password is 1234.

Important:  

Proceed with caution when changing the password as this operation 

cannot be undone. If the password is lost or is unavailable, contact Cisco customer 
support.

To change the lock level password:

1. From the 

Administration

 screen, press the yellow button (

Adv Admin

).

2. Select 

Set Lock Level Password

 and press 

OK

.

3. Press 

OK

 to enter the current password and press 

OK

. For security, a default 

character is substituted for each button pressed.

4. Press 

OK

 to enter the new password, any number from 0 to 9, and press 

OK

. 

5. Press 

OK

 to enter the new password again for password confirmation and press 

OK

. A message appears informing you that the password was changed 

successfully.

Note:  

If the password is lost or is unavailable, contact Cisco customer support.

Summary of Contents for D9865





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands