Cisco D9865 Installation And Operation Manual Download Page 181

Page: 181 / 260

4035197 Rev C

D9865 Satellite Receiver Installation and Operation Guide

5-61

Viewing the Backup/Restore History

To View the backup and restore Status Information

Proceed as follows to view the backup and restore Status page:

From the user interface of the D9865, click

System Settings

Settings File

Status

The Status page is displayed.

The following table shows the Backup History, Restore History, and Operation
History table information:

Status

Description

Last Backup File Name

Name of the file that was successfully exported.

Backup Timestamp

Date and time of the last successful backup file
saved.

Last Restored File Name Name of the last file that was successfully restored.

Restore Time Stamp

Date and time of the last successful restore.

Operation Status

Status of the current backup operation (Inprogress,
Pass, or Fail).

Detailed Operation
Status

Detailed processing step for tracking backup
progress.

Percentage Completed

Percentage of backup function completed.

Summary of Contents for D9865





































































































































































































































































Search results

Summary of Contents for D9865

Reviews:

Brands by name

Popular brands

Cisco D9865, Installation And Operation Manual

Search results

Summary of Contents for D9865

Reviews:

Brands by name

Popular brands