Cisco D9865, Installation And Operation Manual

Page: 57 / 260

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-23
Setting up LNB
To Set Up LNB Parameters
Proceed as follows to set up the LNB:
1. From the Preset/LNB Setup menu, press the yellow button ( LNB ) to set up the
LNB.
Note: You can configure up to 10 LNB presets.
2. The following table describes each of the options:
Selection Options Description
LNB Configuration 1 to 10 Number identifying the current preset LNB
configuration.
LNB Power
(For more
information, see
LNB
Power Settings , on
page 4-25.)
18-H For H polarization.
13-V For V polarization.
Off Use for external LNB power.
Note: LNB power must be on if DiSEqC is
required.
H-NIT Initially applies the horizontal polarization
voltage, and then follows the polarization based
on the NIT.
V-NIT Initially applies the vertical polarization voltage,
and then follows the polarization based on the
NIT.