
Enabling MLDP
Perform this task to enable Multicast Label Distribution Protocol (MLDP) in MPLS LDP.
SUMMARY STEPS
1.
configure
2.
mpls ldp
3.
mldp
4.
end
or
commit
DETAILED STEPS
Purpose
Command or Action
Enters global configuration mode.
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Enters the MPLS LDP configuration mode.
mpls ldp
Example:
RP/0/RP0/CPU0:router(config)#
mpls ldp
Step 2
Enables MLDP.
mldp
Example:
RP/0/RP0/CPU0:router(config-ldp)#
mldp
RP/0/RP0/CPU0:router(config-ldp-mldp)#
Step 3
end
or
commit
Step 4
•
When you issue the
end
command, the system prompts you to
commit changes:
Uncommitted changes found, commit them before
Example:
RP/0/RP/0/RP0/CPU0:router
(config-ldp-mldp)# end
exiting(yes/no/cancel)?
[cancel]:
or
RP/0/RP/0/RP0/CPU0:router
(config-ldp-mldp)# commit
•
Entering
yes
saves configuration changes to the running
configuration file, exits the configuration session, and returns the
router to EXEC mode.
•
Entering
no
exits the configuration session and returns the router
to EXEC mode without committing the configuration changes.
•
Entering
cancel
leaves the router in the current configuration session
without exiting or committing the configuration changes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
69
Implementing MPLS Label Distribution Protocol
Enabling MLDP