manualshive.com logo in svg

Cisco Cisco Small Business Unmanaged Switch SR2016, User Manual

Share
Download
Cisco Cisco Small Business Unmanaged Switch SR2016 User Manual Download Page 35

Chapter 5

Advanced Configuration

28

WebView Switches

VLAN Management > VLAN to Ports

The 

VLAN  to  Ports

  screen  contains  fields  for  configuring 

VLANs to a ports. 

VLAN Management > VLAN to Ports

Port 

Displays the interface number.

Mode 

Indicates  the  port-to-VLAN  mode.  The  possible 

field values are: 

General 

 

•

Indicates  the  port  belongs  to  VLANs,  and 

each VLAN is user-defined as tagged or untagged (full 
802.1Q mode).

Access 

 

•

Indicates the port belongs to a single untagged 

VLAN. When a port is in 

Access

 mode, the packet types 

which are accepted on the port cannot be designated. 
Ingress filtering cannot be enabled or disabled on an 
access port.

Trunk 

 

•

Indicates the port belongs to VLANs in which 

all ports are tagged, except for one port that can be 
untagged.

Join VLAN 

Defines  the VLANs  to  which  the  interface  is 

joined.

VLAN to Ports > Join VLAN

VLANs 

Displays the PVID tag.

LAG 

Indicates if the port is a member of a LAG. If it is a 

member of a LAG, it cannot be configured to a VLAN. The 
LAG to which it belongs can be configured to a VLAN. 

VLAN Management > GVRP

GARP  VLAN  Registration  Protocol  (GVRP)  is  specifically 
provided for automatic distribution of VLAN membership 
information  among  VLAN-aware  bridges.  GVRP  allows 
VLAN-aware  bridges  to  automatically  learn  VLANs  to 
bridge  ports  mapping,  without  having  to  individually 
configure each bridge and register VLAN membership.

VLAN Management > GVRP

The  Global  System  LAG  information  displays  the  same 
field  information  as  the  ports,  but  represents  the  LAG 
GVRP information.

The 

GVRP

 screen is divided into two areas, GVRP and GVRP 

Table. The field definitions for both areas are the same.

Enable GVRP 

Enables and disables GVRP on the device.

Interface 

Displays  the  interface  on  which  GVRP  is 

enabled. The possible field values are: 

Port 

 

•

Indicates  the  port  number  on  which  GVRP  is 

enabled.

LAG 

 

•

Indicates  the  LAG  number  on  which  GVRP  is 

enabled.

GVRP State 

Check this checkbox to enable GVRP on the 

interface. 

Dynamic VLAN Creation 

Check this checkbox to enable 

Dynamic VLAN creation on the interface. 

GVRP Registration 

Check this checkbox to enable VLAN 

registration through GVRP on the device. 

The 

Update

 button adds the configured GVRP setting to 

the table at the bottom of the screen.

Summary of Contents for Cisco Small Business Unmanaged Switch SR2016

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands