manualshive.com logo in svg

Cisco Cisco Small Business Unmanaged Switch SR2016, User Manual

Share
Download
Cisco Cisco Small Business Unmanaged Switch SR2016 User Manual Download Page 34

Chapter 5

Advanced Configuration

27

WebView Switches

VLAN Management > Port Setting

The 

VLAN  Port  Setting

  screen  provides  parameters  for 

managing ports that are part of a VLAN. The port default 
VLAN  ID  (PVID)  is  configured  on  the 

VLAN  Port  Setting

 

screen.  All  untagged  packets  arriving  to  the  device  are 
tagged by the ports PVID.

VLAN Management > Port Settings

Port 

The port number included in the VLAN.

Mode 

Indicates the port mode. Possible values are:

General 

 

•

The port belongs to VLANs, and each VLAN 

is  user-defined  as  tagged  or  untagged  (full  802.1Q 
mode).

Access 

 

•

The port belongs to a single untagged VLAN. 

When a port is in Access mode, the packet types which 
are  accepted  on  the  port  (packet  type)  cannot  be 
designated. It is also not possible to enable or disable 
ingress filtering on an access port.

Trunk 

 

•

The port belongs to VLANs in which all ports are 

tagged (except for an optional single native VLAN).

Acceptable  Frame  Type 

Packet  type  accepted  on  the 

port. Possible values are:

Admit All 

 

•

Indicates that both tagged and untagged 

packets are accepted on the port.

Admit Tag  Only 

 

•

Indicates  that  only  tagged  packets 

are accepted on the port.

PVID 

Assigns  a  VLAN  ID  to  untagged  packets.  The 

possible  values  are 

2–4094

.  VLAN  4095  is  defined  as 

per  standard  and  industry  practice  as  the  discard VLAN. 
Packets classified to the Discard VLAN are dropped.

Ingress Filtering 

Enables or disables Ingress filtering on 

the port. Ingress filtering discards packets which do not 
include an ingress port.

LAG 

Indicates the LAG to which the VLAN is defined.

VLAN Management > Ports to VLAN

The 

Ports  to  VLAN

  screen  contains  fields  for  configuring 

ports  to  a  VLAN.  The  port  default  VLAN  ID  (PVID)  is 
configured  on  the 

Create  VLAN

  screen.  All  untagged 

packets  arriving  to  the  device  are  tagged  by  the  ports 
PVID.

VLAN Management > Ports to VLAN

The 

Ports to VLAN

  screen  contains  a  Port Table  for VLAN 

parameters  for  each  port.  Ports  are  assigned  VLAN 
membership by selecting and configuring the presented 
configuration options. 

VLAN 

The VLAN number.

Access 

Indicates the port belongs to a single untagged 

VLAN. When  a  port  is  in  Access  mode,  the  packet  types 
which  are  accepted  on  the  port  cannot  be  designated. 
Ingress  filtering  cannot  be  enabled  or  disabled  on  an 
access port.

Trunk 

Indicates  the  port  belongs  to  VLANs  in  which 

all  ports  are  tagged,  except  for  one  port  that  can  be 
untagged.

General 

Indicates the port belongs to VLANs, and each 

VLAN is user-defined as tagged or untagged (full 802.1Q 
mode).

Tagged 

Defines the interface as a tagged member of a 

VLAN. All packets forwarded by the interface are tagged. 
The packets contain VLAN information.

Untagged 

Packets  forwarded  by  the  interface  are 

untagged.

Forbidden 

Forbidden  ports  are  not  included  in  the 

VLAN.

Exclude 

Excludes the interface from the VLAN. However, 

the  interface  cannot  be  added  to  the  VLAN  through 
GVRP.

Summary of Contents for Cisco Small Business Unmanaged Switch SR2016

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands