Chapter 5
Advanced Configuration
25
WebView Switches
PVE
When a port is a Private VLAN Edge (PVE) port,
it bypasses the Forwarding Database and forwards all
unicast, multicast, and broadcast traffic to an uplink.
NOTE:
All ports in the same PVE group should
join the same VLAN group.
LAG
(Read-only) The LAG to which this port belongs, if
the port is a LAG member.
Click
Save
to save the settings and leave the screen open.
Click
Save & Close
to save the settings and close the
screen. Click
Close
to close the screen without saving the
settings.
Port Management > Link Aggregation
Port Management > Link Aggregation
LAG
The LAG number (1-8).
Description
The user-defined description for the LAG.
Admin Status
The administrative status of the LAG.
Up
indicates that the LAG is available.
Down
indicates that
administrator has taken the port offline. When modifying
the option, click
Save Settings
.
Type
Indicates if a LAG has been manually configured
(static) or dynamically set through LACP.
Link Status
Displays the status of the link.
Speed
Displays the port speed.
Duplex
Displays the duplex mode.
Flow Control
Displays the flow control status of the LAG.
It is active when the port uses Full Duplex Mode.
LAG Mode
Displays the LAG status:
On
,
Off
, or
Not
Present
.
Detail
To create a new LAG, click
Detail
in the
Detail
column to display the
Link Aggregation
detail screen.
Link Aggregation > Detail
Link Aggregation > Detail
LAG Configuration
LAG
The LAG number (
1
-
8
). To display or edit another
LAG, select the number from the drop-down menu.
Description
The user-defined LAG description of up to
64 characters. This field is blank by default.
LACP
Select the checkbox to enable Link Aggregation
Control Protocol (LACP).
LAG Type
(Read-only) The LAG type.
Administrative Status
The LAG’s administrative status.
Select either
Up
or
Down
to enable or disable the LAG.
Current Status
(Read-only) The LAG’s status, either
Up
or
Down
.
Reactivate Suspended LAG
If the LAG has been
suspended, select this checkbox to reactivate the LAG.
Operational Status
(Read-only) Displays whether the
LAG is operational or non-operational.
Admin Auto Negotiation
Enables or disables Auto
Negotiation on the LAG. Auto-negotiation is a protocol
between two link partners that enables a LAG to advertise
its transmission rate, duplex mode and flow control (the
flow control default is disabled) abilities to its partner.
Current Auto Negotiation
The current
Auto Negotiation
setting.
Admin Speed
The configured speed at which the LAG is
operating.
Current LAG Speed
(Read-only) The current speed at
which the LAG is operating.
Admin Flow Control
Enables or disables flow control or
enables the auto negotiation of flow control on the LAG.
Current Flow Control
(Read-only) The current flow
control setting.
PVE
Displays the PVE group to which the LAG is
configured.
