Cisco Catalyst 3560-E Series Message Manual Download Page 143 | Manualshive

Page: 143 / 150

background image

2-125

Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide

OL-9772-05

Chapter 2 Message and Recovery Procedures

UFAST_MCAST_SW Messages

UFAST_MCAST_SW Messages

Error Message

UFAST_MCAST_SW-3-PROC_START_ERROR: No process available for

transmitting UplinkFast packets.

Explanation

UplinkFast packets will not be sent because the process could not be created.

Recommended Action

UplinkFast does not work unless you reload the switch software. If the message

appears again after reload, copy the message exactly as it appears on the console or in the system
log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit
to look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the

“Error

Message Traceback Reports” section on page 1-7

.

Error Message

UFAST_MCAST_SW-4-MEM_NOT_AVAILABLE: No memory is available for

transmitting UplinkFast packets on Vlan [dec].

Explanation

UplinkFast packets will not be sent on a VLAN due to memory limitations. [dec] is the

VLAN ID.

Recommended Action

Reduce other system activity to ease memory demands.

VQPCLIENT Messages

Error Message

VQPCLIENT-2-CHUNKFAIL: Could not allocate memory for VQP.

Explanation

An error occurred when the system tried to allocate memory for the VQP client.

Recommended Action

Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the

“Error

Message Traceback Reports” section on page 1-7

.

Error Message

VQPCLIENT-2-DENY: Host [enet] denied on interface [chars].

Explanation

The VMPS has denied access for the given host MAC address to an interface. [enet] is

the host MAC address, and [chars] is the interface name.

Recommended Action

No action is normally required. If you think that the host should have been

allowed access, verify the configuration on the VMPS.

«
...
141
142
143
144
145
...
»

Summary of Contents for Catalyst 3560-E Series























































































































































Reviews:

No comments

Related manuals for Catalyst 3560-E Series

Brand: Patton electronics Pages: 2

MatrixPRO-II DVI 16x16

Brand: Barco Pages: 43

Brand: Barco Pages: 5

DR-4100P Series

Brand: Idis Pages: 30

Brand: Ubiquiti Pages: 3

Firebox SOHO 6 Wireless

Brand: Watchguard Pages: 8

Brand: Yaesu Pages: 2

Brand: ETAS Pages: 69

EXPANSION CARD X-DANTE

Brand: Behringer Pages: 65

Brand: Dialogic Pages: 2

Brand: Teac Pages: 20

cMT-FHDX Series

Brand: Maple Systems Pages: 2

Brand: NETGEAR Pages: 2

Brand: ZALMAN Pages: 22

CompactPCI CC8-BLUES

Brand: EKF Electronik Pages: 52

Brand: QTech Pages: 406

Brand: XAVI Technologies Corp. Pages: 63

Brand: ZALMAN Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands