Cisco Catalyst 3560-E Series, Message Manual

Page: 132 / 150

2-114
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
SW_MACAUTH Messages
Error Message
SW_DAI-6-DHCP_SNOOPING_PERMIT: [dec] ARPs ([chars]) on [chars], vlan
[dec].([[enet]/[chars]/[enet]/[chars]/[time-of-day]]).
Explanation
The switch has received ARP packets that have been permitted because the IP and MAC
address of the sender match the DHCP snooping database for the received VLAN. The first [dec] is
the number of valid ARP packets. The first [chars] is either Req (request) or Res (response), and the
second [chars] is the short name of the ingress interface. The second [dec] is the ingress VLAN ID.
[enet]/[chars]/[enet]/[chars]/[time-of-day] is the MAC address of the sender, the IP address of the
sender, the MAC address of the target, the IP address of the target, and the time of day.
Recommended Action
No action is required.
SW_MACAUTH Messages
Error Message
SW_MACAUTH-4-UNAUTH_MAC: Unauthenticated MAC [enet] on port [chars]
Explanation
The switch has received an unauthenticated MAC address on the specified port. [enet]
is the unauthenticated MAC address, and [chars] is the port.
Recommended Action
No action is required.
Error Message
SW_MACAUTH-5-CLEAR_TABLE: MAC Authentication Table Cleared
Explanation
The MAC authentication table was cleared.
Recommended Action
No action is required.
Error Message
SW_MACAUTH-5-MACAUTH_ENADSA: MAC Authentication [chars]
Explanation
MAC authentication is enabled or disabled. [chars] is the MAC authentication status,
either enabled or disabled.
Recommended Action
No action is required.
Error Message
SW_MACAUTH-5-MAC_AUTHENTICATED: MAC [enet] was authenticated
Explanation
The switch has received a command to authenticate a MAC address. [enet] is the MAC
address.
Recommended Action
No action is required.