Cisco BTS 10200, Troubleshooting Manual

Page: 26 / 62

1-20
Cisco BTS 10200 Softswitch ISDN Provisioning and Troubleshooting
OL-12436-02
Chapter 1 ISDN Provisioning
ISDN Features and Supplementary Services
ISDN Timer Configuration Parameters
The timer default values for the command-line interface (CLI) are set to default values required per the
network side. There are minor differences in the timer values of user-side timer versus network-side
timers, and these can be fine-tuned per user requirements.
Table 1-1 compares the timer values of
network-side and user-side state machine as specified in Q.931 and as implemented in the Cisco BTS
10200 Softswitch.
ISDN Features and Supplementary Services
ISDN features and supplementary services include the following:
•
Information Digit Feature
• Calling and Connected Name Delivery
•
Calling Number Identification Service (CLIP/CLIR)
• Redirecting Number Support
Table 1-1 Configuration (Protocol) Timers
Timer Number BTS Default User Side Network Side
T301 300 >180 >180
T302 10 15 10–15
T303 4 4 4
T304 20 30 20
T305 30 30 30
T306 60 — 30
T307 3 — 180
T308 4 4 4
T309 90 90 90
T310 10 30–120 10
T312 — (T303 restarted
instead) — 6
T313 Not implemented 4 —
T314 Not implemented 4 4
T316 30 120 120
T317 Not implemented < 120 < 120
T318 Not applicable for PRI 4 —
T319 Not applicable for PRI 4 —
T320 Not implemented — 30
T321 20 30 30
T322 4 4 4
T323 30 30 30