Cisco BTS 10200 Troubleshooting Manual Download Page 33

Page: 33 / 62

1-27

Cisco BTS 10200 Softswitch ISDN Provisioning and Troubleshooting

OL-12436-02

Chapter 1 ISDN Provisioning

ISDN PRI PBX Variant Setup

Nortel Northstar with NI2

To provision a Nortel Northstar PBX with NI2, replace Step 3a with the following:

add isdn-dchan-profile id=nt-ni2; type=swv-us-ni2-pri;interface-type=network;

isdn-service-supp=n; isdn-restart-chan-supp=n; isdn-restart-interface-supp=y;

isdn-farend-init=n; isdn-query-supp=y; isdn-restart-pri-supp=n; nfas-supp=n;

bchan-neg-supp=y; iw-spec=t1-609;disp-ie-supp=y; facil-ie-supp=y;flip-chan-ext-bit=n;

facil-ie-codeset=0; disp-ie-codeset=0;proprietary-supp=0; cname-encode-method=protocol;

Nortel Option 11 with NI2

To provision a Nortel NI2 PBX with calling name in a raw display IE support, replace Step 3a with the
following:

add isdn-dchan-profile id=nt-ni2;type=swv-us-ni2-pri;isdn-service-supp=n;

isdn-farend-init=n;isdn-restart-pri-supp=n;isdn-query-supp=y;nfas-supp=n;

isdn-restart-chan-supp=n; isdn-restart-interface-supp=y;bchan-neg-supp=y;

cname-encode-method=protocol;disp-ie-supp=y; disp-ie-codeset=0;

Nortel Option 11 with DMS-100

To provision a Nortel DMS-100 PBX with calling name support (per DMS-100 specifications) and
replacement of calling party number with charge number, replace Step 3a with the following 2
commands:

add isdn-dchan-profile id=nt-dms100;type=swv-dms-pri;isdn-service-supp=n;

isdn-farend-init=n isdn-restart-pri-supp=n;isdn-query-supp=y; nfas-supp=n;

isdn-restart-chan-supp=n;isdn-restart-interface-supp=y;bchan-neg-supp=y;

cname-encode-method=protocol;disp-ie-supp=y; disp-ie-codeset=0;

add isdn-tg-profile id=lucent; inband-info=y; chrg-num-supp=y;

Siemens Hicom 300 with NI2

To provision a Siemens Hicom 300 with NI2 (Siemans NI1 PBX), replace Step 3a with the following:

add isdn-dchan-profile id=sieman-cnamraw;type=swv-us-ni2-pri;isdn-service-supp=n;

isdn-restart-pri-supp=n;isdn-query-supp=y; isdn-restart-chan-supp=n;

isdn-restart-interface-supp=y; nfas-supp=n;bchan-neg-supp=y;cname-encode-method=raw-disp;

disp-ie-supp=y; disp-ie-codeset= 0; isdn-farend-init=y;

Siemens Hicom 300 with DMS-100

To provision a Siemens Hicom 300 with DMS-100 (Siemans NI1 PBX), replace Step 3a with the
following:

add isdn-dchan-profile id=sieman-dms100;type=swv-dms-pri;interface-type=network;

isdn-service-supp=y; isdn-restart-chan-supp=y;isdn-restart-interface-supp=y;

isdn-farend-init=n; t-301=300;t-302=10; t-303=4;t-305=30;

t-308=4;t-309=90;t-310=10;t-316=30;t-322=4; t-323=30; isdn-query-supp=y;

isdn-restart-pri-supp=y;nfas-supp=n;t-321=20;bchan-neg-supp=y;iw-spec=t1-609;

disp-ie-supp=y;facil-ie-supp=n;cname-encode-method=protocol;

Summary of Contents for BTS 10200































































Search results

Summary of Contents for BTS 10200

Reviews:

Related manuals for BTS 10200

Brands by name

Popular brands

Cisco BTS 10200, Troubleshooting Manual

Search results

Summary of Contents for BTS 10200

Reviews:

Related manuals for BTS 10200

Brands by name

Popular brands