Cisco BEKEM Manual Download Page 3

Page: 3 / 16

Table 2: Cisco IP Phones and Supported Cisco IP Phone 8851/8861 Key Expansion Module and Cisco IP Phone 8865 Key Expansion Module

Supported Numbers of Key Expansion Modules and Buttons

Cisco IP Phone Model

2; dual LCD screen, 14 line keys, two pages, providing 56 buttons

Cisco IP Phone 8851

3; dual LCD screen, 14 line keys, two pages, providing 84 buttons

Cisco IP Phone 8861

3; dual LCD screen, 14 line keys, two pages, providing 84 buttons

Cisco IP Phone 8865

Key Expansion Module Power Information

If you use a key expansion module with your IP phone, then Power over Ethernet (PoE) is enough to power
your expansion modules. But, your phone must have an IP address in order to charge the expansion module.

A power cube is needed for smartphone or tablet charging when your key expansion module is attached.

A key expansion module uses 48V DC, 5W per module. If you are charging a smartphone or a tablet, note
the following:

• Side USB: Up to 500mA/2.5W charging

• Back USB: Fast charging, Supports up to 2.1A/10.5W charging

Table 3: Power-Supply Compatibility for Cisco IP Phone 8800 Key Expansion Module

Cisco IP Phone Power Cube 4

802.3at PoE

802.3af Power over Ethernet
(PoE)

Configuration

Yes

8851 with 1 key expansion
module

Yes

See the third note below

8851with 2 key expansion
modules

Yes

8861 with 1 key expansion
module

Yes

See the first note below

8861 with 2 key expansion
modules

Yes

See the first note below

8861 with 3 key expansion
modules

Cisco IP Phone Key Expansion Module

Key Expansion Module Power Information

Summary of Contents for BEKEM

















Search results

Summary of Contents for BEKEM

Reviews:

Related manuals for BEKEM

Brands by name

Popular brands

Cisco BEKEM, Manual

Search results

Summary of Contents for BEKEM

Reviews:

Related manuals for BEKEM

Brands by name

Popular brands