Cisco BE6000 Design Manual Download Page 78

Page: 78 / 107

Deployment Details

PAGE 78

Configure Unified CM trunk to TelePresence Conductor for personal and
scheduled CMR conferences

trunk

is a communications channel on Unified CM that enables it to connect to other servers. Using one

or more trunks, Unified CM can receive or place voice, video, and encrypted calls, exchange real-time
event information, and communicate in other ways with call control servers and other external servers.

Navigate to

, and then click

in order to create a new SIP trunk.

Enter the following into the relevant fields:



Trunk Type—



Device Protocol—



Trunk Service Type—

Click

Enter the following into the relevant fields, leaving other fields at their default values:



Device Name—



Device Pool—



Destination Address—



Destination Port—



SIP Trunk Security Profile—



SIP Profile—



Normalization Script—

Summary of Contents for BE6000











































































































Search results

Summary of Contents for BE6000

Reviews:

Brands by name

Popular brands

Cisco BE6000, Design Manual

Search results

Summary of Contents for BE6000

Reviews:

Brands by name

Popular brands