The tool in the Strap Tool Kit is manufactured and supported by BAND-IT. For more information about
the tool, see
.
Note
Figure 12: Strap Tool Kit Contents
Strap tool documentation (not shown)
2
Strap tool
1
Customer-Supplied Materials and Tools
You must supply some or all of these items to mount the router onto a pole or wall. The items you supply
depends on the installation procedure that you use.
Required for These Procedures
Item
•
Mounting the Router onto a Pole, on page 34
•
Mounting the Router onto a Wall, on page 41
13-mm box-end wrench or socket set
Mounting the Router onto a Wall, on page 41
Drill and drill bit
Grounding the Router, on page 45
Phillips screwdriver, or other screwdriver for
cross-recessed screws
Grounding the Router, on page 45
Crimping tool or pliers
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
30
OL-29732-01
Installing the Router
Customer-Supplied Materials and Tools
