IP65 RJ45 cable
Figure 36: IP65 Compliant RJ45 Cable
Procedure
Step 1
Remove the dust cap from the copper port on the router.
Step 2
Remove the protection cap from the RJ45 cable.
Step 3
Insert the RJ45 cable connector into the Cu port connector until the connector snaps into place. See the
following figure.
Figure 37: Connecting the RJ45 Cable to Copper Port
Copper port on router
3
RJ45 bulkhead
1
RJ45 connetor
2
Step 4
Connect the bulkhead of the RJ45 cable to the Cu port and turn it clockwise until it locks in place as shown
in the following figure. Ensure that there is no gap between the bulkhead and the copper port connector.
Figure 38: Locking the Bulkhead to Copper Port
No gap between bulkhead and Cu port
1
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
62
OL-29732-01
Installing the Router
Connecting Network Cables
