manualshive.com logo in svg

Cisco ASA 5508-X, Configuration Manual

Share
Download
Cisco ASA 5508-X Configuration Manual Download Page 110

 

6-28

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 6      ASA and Cisco TrustSec

  History for Cisco TrustSec

•

show cts pac

History for Cisco TrustSec

Table 6-6

History for Cisco TrustSec

Feature Name

Platform 
Releases

Description

Cisco TrustSec 

9.0(1)

Cisco TrustSec provides access control that builds on an existing identity-aware 
infrastructure to ensure data confidentiality between network devices and 
integrate security access services on one platform. In the Cisco TrustSec 
feature, enforcement devices use a combination of user attributes and endpoint 
attributes to make role-based and identity-based access control decisions. 

In this release, the ASA integrates with Cisco TrustSec to provide security 
group-based policy enforcement. Access policies within the Cisco TrustSec 
domain are topology-independent, based on the roles of source and destination 
devices rather than on network IP addresses. 

The ASA can use Cisco TrustSec for other types of security group-based 
policies, such as application inspection; for example, you can configure a class 
map that includes an access policy based on a security group. 

We introduced or modified the following commands: 

access-list extended

,

 cts

 

sxp

 

enable

,

 cts

 

server-group

, 

cts

 

sxp

 

default

, 

cts

 

sxp

 

retry

 

period

, 

cts

 

sxp

 

reconciliation

 

period

, 

cts

 

sxp

 

connection

 

peer

, 

cts

 

import-pac

, 

cts

 

refresh

 

environment-data

, 

object-group security

, 

security-group

, 

show

 

running-config cts

, 

show

 

running-config

 

object-group

, 

clear

 

configure cts

, 

clear

 

configure

 

object-group

, 

show cts pac

, 

show

 

cts

 

environment-data

, 

show cts environment-data sg-table

, 

show cts sxp connections

, 

show

 

object-group

, 

show

 

configure security-group

, 

clear cts environment-data

, 

debug cts, 

and

 packet-tracer

.

Layer 2 Security Group Tag 
Imposition

9.3(1)

You can now use security group tagging combined with Ethernet tagging to 
enforce policies. SGT plus Ethernet Tagging, also called Layer 2 SGT 
Imposition, enables the ASA to send and receive security group tags on Ethernet 
interfaces using Cisco proprietary Ethernet framing (EtherType 0x8909), which 
allows the insertion of source security group tags into plain-text Ethernet 
frames. 

We introduced or modified the following commands: 

cts manual

, 

policy static 

sgt

, 

propagate sgt

, 

cts role-based sgt-map

, 

show cts sgt-map

, 

packet-tracer

, 

capture

, 

show capture

, 

show asp drop

, 

show asp table classify

, 

show 

running-config all

, 

clear configure all

, and 

write memory

.

Summary of Contents for ASA 5508-X













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands