4-6
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Chapter 4 Channelized T3 Feature Card
Online Insertion and Removal of the CT3 Feature Card
To install the CT3 feature card, follow these steps:
Step 1
Attach an ESD-preventive wrist strap.
Step 2
Slide the feature card into the slot until the connector pins make contact with the carrier card backplane
connector. (See
Figure 4-9
and
Figure 4-10
.)
Figure 4-9
Installing the CT3 Feature Card in the Cisco AS5350XM Universal Gateway
Figure 4-10
Installing the CT3 Feature Card in the Cisco AS5400XM Universal Gateway
Step 3
Align the captive screws with their holes, and seat the card completely.
Step 4
Tighten the screws to secure the feature card to the chassis. (See
Figure 4-11
and
Figure 4-12
.)
Figure 4-11
Tightening the Captive Screws on the Cisco AS5350XM Universal Gateway
58762
37169
58763
Carrier
card
DFC
Captive
screw
Captive
screw
Chassis