2-7
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Chapter 2 Feature Card and Carrier Card Guidelines
Getting Help
Figure 2-11
Blank Feature Card Cover
Step 5
For AC-powered units, reconnect the AC power cord. For DC-powered units, remove the tape from the
circuit breaker switch handle, and reinstate power by moving the handle of the circuit breaker to the ON
position. For more information about the AC and DC power supplies, see the chassis installation guide
for your universal gateway.
Step 6
Reconnect all interface cables.
Getting Help
For information about technical support, onsite service, and exchange and repair services, see the
“Obtaining Technical Assistance” section on page xvi
.
Where to Go Next
The remaining chapters of this guide include information about installing and troubleshooting feature
cards and about building cables.
•
Chapter 3, “T1 and E1 Feature Cards”
•
Chapter 4, “Channelized T3 Feature Card”
•
Chapter 5, “Universal Port and Dial-Only Feature Cards”
•
Chapter 6, “Voice Feature Card”
•
Chapter 7, “Troubleshooting”
•
Appendix A, “Cabling Specifications”
36033
